Electric Motor Repair Electric Motor Maintenance-Martindale Products
Espa˝ola
Franšais
sales@martindaleco.com
phone:  216-521-8567
fax:       216-521-9476
Site Search:

Ground Teeth

M-2 High Speed Steel

Hollow Ground For Side Clearance

Rake Angle of Teeth: 0░

Metric Sizes Available

CLICK HERE for Printable Version of this page.

Type SS Screw
Slotting Saws
Used for Cutting-off, slitting
and slotting of Steel

(Similar to slots in screw heads).

NOTE:
     Saws in schedule are stocked for immediate shipment.  For thicknesses not shown, use next higher price in schedule (plus a slight grinding charge for smaller quantities).
     Other diameters from 1/4" to 6" are also available, as well as other hole sizes, numbers of teeth, rake angles and bevels.
     Cutting Stainless Steel requires more side clearance - specify "for Stainless" when ordering.

Coating Service
TiN, TiCN and other coatings are available.  Prices on application.
Resharpening Service
Complete Resharpening service is available. 
Prices on application.

Tolerances: O.D. ▒ .005; Thickness ▒ .001;
I.D. +.001 - .000
Closer tolerances available at additional cost.

STOCK SAWS

Thickness O.D. 1-3/4" 2-1/4" 2-3/4" 3" 4" 5" 6"
B & S Gage No. and Fraction Decimal Hole 5/8" 5/8" 1" * 1" 1" 1" 1"
No. of Teeth 64, 90 60 36, 44
56, 72
36, 44
56, 72
60, 72
90
60, 72
90, 110
72, 90
120
3/16" .187"       OSSC187 OSSD187 OSSE187 OSSF187 OSSG187
5 .182"       OSSC182 OSSD182 OSSE182 OSSF182 OSSG182
11/64" .172"       OSSC172 OSSD172 OSSE172 OSSF172 OSSG172
6 .162:       OSSC162 OSSD162 OSSE162 OSSF162 OSSG162
5/32" .156"       OSSC156 OSSD156 OSSE156 OSSF156 OSSG156
7 .144"       OSSC144 OSSD144 OSSE144 OSSF144 OSSG144
9/64" .141"       OSSC141 OSSD141 OSSE141 OSSF141 OSSG141
8 .128"       OSSC128 OSSD128 OSSE128 OSSF128 OSSG128
1/8" .125"     OSSB125 OSSC125 OSSD125 OSSE125 OSSF125 OSSG125
9 .114"     OSSB114 OSSC114 OSSD114 OSSE114 OSSF114 OSSG114
7/64" .109"     OSSB109 OSSC109 OSSD109 OSSE109 OSSF109 OSSG109
10 .102"     OSSB102 OSSC102 OSSD102 OSSE102 OSSF102 OSSG102
3/32" .094"     OSSB094 OSSC094 OSSD094 OSSE094 OSSF094 OSSG094
11 .091"     OSSB091 OSSC091 OSSD091 OSSE091 OSSF091 OSSG091
12 .081"     OSSB081 OSSC081 OSSD081 OSSE081 OSSF081 OSSG081
5/64" .078"     OSSB078 OSSC078 OSSD078 OSSE078 OSSF078 OSSG078
13 .072"   OSSA072 OSSB072 OSSC072 OSSD072 OSSE072 OSSF072 OSSG072
14 .064"   OSSA064 OSSB064 OSSC064 OSSD064 OSSE064 OSSF064 OSSG064
1/16" .062"   OSSA062 OSSB062 OSSC062 OSSD062 OSSE062 OSSF062 OSSG062
15 .057"   OSSA057 OSSB057 OSSC057 OSSD057 OSSE057 OSSF057 OSSG057
16 .051"   OSSA051 OSSB051 OSSC051 OSSD051 OSSE051 OSSF051 OSSG051
3/64" .047"   OSSA047 OSSB047 OSSC047 OSSD047 OSSE047 OSSF047 OSSG047
17 .045"   OSSA045 OSSB045 OSSC045 OSSD045 OSSE045 OSSF045 OSSG045
18 .040"   OSSA040 OSSB040 OSSC040 OSSD040 OSSE040 OSSF040 OSSG040
19 .036"   OSSA036 OSSB036 OSSC036 OSSD036 OSSE036    
20 .032"   OSSA032 OSSB032 OSSC032 OSSD032 OSSE032    
1/32" .031"   OSSA031 OSSB031 OSSC031 OSSD031 OSSE031    
21 .028"   OSSA028 OSSB028 OSSC028 OSSD028 OSSE028    
22 .025"   OSSA025 OSSB025 OSSC025 OSSD025 OSSE025    
23 .023"   OSSA023 OSSB023 OSSC023 OSSD023 OSSE023    
24 .020"   OSSA020 OSSB020 OSSC020 OSSD020 OSSE020    
(ADD NO. OF TEETH TO CATALOG NUMBER WHEN ORDERING)
* 3/4" hole available at no extra cost on 2-3/4" O.D. Î 72-teeth. (Available at extra cost on all others.)
Home | Metal Working Mica Saws | Rotary Burs | Undercutters | Abrasives | Commutator Grinders | Electrical Test Equipment | Electrician's Hand Tools | Other Products